06

2024

-

09

Detailed introduction of the ring die processing (repair) machine control system


The control system of the ring mold processing (repair) machine is a key component of the equipment, which plays a vital role in the operation, processing accuracy and operation convenience of the equipment, mainly including the following aspects:

 

  1. Control Core5:
    • PLC (Programmable Logic Controller): This is the core brain of the control system of the ring die processing (repair) machine. It can receive signals from various sensors, buttons, switches and other input devices, process and judge these signals according to preset programs and logic, and then output control signals to output devices such as drive motors and actuators to achieve Accurate control of equipment. For example, PLC can control the feed speed, cutting depth and other processing parameters of the tool according to the size and wear degree of the ring die to ensure the accuracy and quality of the processing.
    • Microprocessor or industrial computerIn some high-end ring mold processing (repair) machines, microprocessors or industrial computers are used as the control core. They have more powerful computing power and data processing ability, and can realize more complex control algorithms and functions, such as multi-axis linkage control, real-time monitoring, fault diagnosis, etc.
  2. Input Devices:
    • Sensor:
      • Position sensor: Used to detect the position information of the tool, ring die and various moving parts. For example, through the grating ruler or encoder installed on the guide rail, the displacement and position of the tool can be monitored in real time, and the position information can be fed back to the control system, so that the control system can accurately control the motion trajectory of the tool and ensure the accuracy of processing.
      • Pressure sensor: Installed on the part where the tool contacts the ring die or other key parts to detect pressure changes during processing. When the pressure exceeds the set threshold, the control system will adjust the feed speed of the tool or stop processing in time to prevent tool damage or excessive wear of the ring die.
      • Temperature sensor: Used to monitor the temperature change of the equipment, especially in some parts that need grinding, drilling and other processing processes. If the temperature is too high, the control system will start the cooling system to reduce the temperature of the equipment and ensure the normal operation of the equipment.
    • Operation Panel: Usually include buttons, switches, touch screens, etc. The operator can input various commands and parameters through the operation panel, such as starting/stopping the equipment, selecting the processing mode, setting the processing parameters, etc. The touch screen operation panel has the characteristics of intuition and convenience. The operator can operate by touching the icons and menus on the screen, which improves the convenience and efficiency of the operation.
  3. Output Device:
    • Drive motor: Used to drive the movement of moving parts such as tools, worktables, guide rails, etc. According to different motion requirements, different types of drive motors will be used, such as servo motors, stepper motors, etc. The servo motor has the advantages of high precision, fast response speed, and wide speed range. It is suitable for occasions with high requirements for position and speed control, such as the feed motion of the tool; the stepper motor has simple structure, low cost, and convenient control, etc. Advantages, suitable for some occasions that do not require high precision, such as the movement of the workbench 15.
    • Actuator: Including cylinders, hydraulic cylinders, etc., used to achieve some auxiliary actions, such as clamping ring molds, replacing tools, etc. The control system controls the action of the actuator by controlling the solenoid valve and other components to achieve precise control of these auxiliary actions.
    • Display: Used to display the operating status, processing parameters, fault information, etc. of the equipment. Operators can understand the operation of the equipment in real time through the display, so as to find and deal with problems in time.
  4. Motion Control Module:
    • Axis Motion ControlRing mold processing (repair) machines usually require motion control of multiple axes, such as X-axis (lateral movement), Y-axis (longitudinal movement), Z-axis (vertical movement), and rotation axis. The motion control module can realize independent control or linkage control of these axes to ensure that the tool can move according to a predetermined trajectory to complete the processing or repair of the ring die. For example, in the ring mold internal circular grinding, it is necessary to control the movement of the X axis and the Z axis at the same time, so that the grinding wheel can be ground along the inner circular surface of the ring mold.
    • Speed and acceleration control: According to the requirements of the processing technology, it is necessary to control the movement speed and acceleration of the tool or worktable. The motion control module can realize precise control of the motion speed and acceleration by adjusting the parameters such as the rotation speed of the drive motor and the acceleration and deceleration time, so as to ensure the efficiency and quality of the processing.
  5. man-machine interface:
    • Operation interface: Provide a friendly operation interface, which is convenient for operators to operate and monitor the equipment. The operation interface usually includes menus, icons, buttons and other elements, and the operator can perform various operations through these elements, such as setting processing parameters, starting/stopping the equipment, and viewing the operating status of the equipment.
    • Monitoring interface: Real-time display of equipment operating status, processing parameters, fault information, etc. The monitoring interface can display this information in a graphical way, so that the operator can intuitively understand the operation of the equipment. For example, through the monitoring interface, you can view the position of the tool, feed speed, cutting depth and other parameters, as well as the temperature, pressure and other status information of the equipment in real time.
  6. Communication Module:
    • Internal Communications: It is used to control the communication between various components within the system, such as the communication between PLC and sensors, drive motors, operation panels, etc. Internal communication usually uses fieldbus, serial communication and other methods to ensure the rapid and accurate transmission of data.
    • External Communications: Used to communicate with external devices or systems, such as with the upper computer, other automation equipment, etc. External communication can use Ethernet, wireless communication and other ways to achieve the remote monitoring of equipment, remote control and data transmission and other functions.
  7. Safety protection module:
    • Emergency stop button: In an emergency, the operator can press the emergency stop button to immediately stop the operation of the equipment to avoid safety accidents.
    • Limit protection: Install a limit switch on the moving parts of the equipment. When the moving parts reach the limit position, the limit switch will be triggered and the control system will stop the corresponding movement to prevent the moving parts from exceeding the range and damaging the equipment.
    • Overload protection: When the drive motor or other equipment is overloaded, the control system will automatically cut off the power supply to protect the equipment from damage.