09
2023
-
06
Principle of automatic punching machine
The principle of automatic punching machine is very humanized, and the CCD positioning punching makes the positioning more accurate.
Automatic punching machine is suitable for: soft board, film, PE, PC, PVC film, polyester, thin aluminum plate, etc. Punching and positioning features: computer type equipment, human-machine interface, direct work mode setting on the touch screen, simple and intuitive; with a special light source can automatically identify the highly reflective, high blackness and other materials on the circular figure, automatic alignment punching; punching by the presser foot on the equipment to flatten the punched film, punching more accurate; work in the 8-inch computer screen or punching place directly to watch the punching reality; can provide special settings, the computer system can be upgraded to improve efficiency. Punching can be viewed directly on the 8" computer screen or at the punching place; special settings are available and the computer system can be upgraded to improve work efficiency. Punching thickness: 0.01mm-2mm (depending on the material) Z large processing size: 1200mm×650mm Display: 8" LCD Working mode: Human-machine interface, set the working mode directly on the computer touch screen, select the hole to be punched Punching speed: 0.5 sec/hole Punching diameter: 1mm-5mm (Z large diameter up to 20mm can be customized) Positioning error: < 0.015mm 0.015mm Z large punching force: 100kg (weighted up to 180kg) External air pressure: 0.4-0.7Mpa Power: AC 220V 400W Equipment weight: 200kg CCD automatic punching machine size: 770×650×1200mm (H×W×L) There are many models of automatic punching machine.
Related News