09

2023

-

06

About the common problems of the automatic punching machine and how to deal with them


On the automatic punching machine of the common problems and handling methods are as follows:

1. hit the inaccurate situation, specific problems to specific analysis, the first and Z effective, first to carry out a little correction of the equipment.
2. Do not punch through. To check whether the mold is installed, whether the mold needs to be replaced, whether the air pressure is enough force. Furthermore, it is the case of closing the mold.
3. The unevenness of the presser foot. Check whether the cylinder should be replaced.
4. The die does not come up after going down or it goes up very slowly. Check whether the solenoid valve of the punching die needs to be replaced.